Pioneer chainsaws

[Acornhill]

Will a P-41 pull a 24" hardnose with 3/8 full comp. chain?

Pioneer Chainsaw Bar 47373 24 058 7 20 Fits Pioneer Others | eBay

Couldn't pass it up for the price & delivery.

Same seller has several other Pioneer branded bars on the evilbay.

Carl.

all day long, i am running a 32" 404 X 063 with no problem.

 

[nstueve]

Hey guys,
After getting rid of my 1200 on the christmas thread I didn't think I would be back here real soon but.... I just got a running P52 in the mail today. Going to clean it up and post pics later. Got it for $100! It looks good but not nearly as good as the P41 above!

Cheers
Nate

 

[Pioneer fan]

I am in the middle of a full rebuild of a PIONEER 2270. I have all the parts i need, and a pdf copy of the shop service manual. The one spec I do not see listed is crankshaft endplay and axial? play. Does anyone know, are have access to these two specs? I am trying to make this a long lasting rebuild, so I am going over everything. Maybe, I am being to thorough, but this saw will be a gift to my Dad, as it is the same model as his dad used for a number of years. Thanks in advance, for any info, or guidance

 

[tbone75]

Thanks Hydrodog !! And Pioneerguy600 !!

He posted the CL ad for this saw , I had to jump through a few hoops to get it , but I just got it today ! My buddy Jerry sent me a PM telling me to get over to the Pioneer thread QUICK ! LOL He knew I was after one of these saws ever since I seen a pic of his ! Bout 2 years ago !! LOL

Haven't cleaned it up yet,this is how it came. Should clean up real nice !

Needs just a couple small things, muffler bolt,I should have ? Fuel cap threads are messed up,choke rod is bent and the hard part I bet? The knob for the oil pump. Brake handle is a little bent , but I can fix that easy I think.



Thanks again guys !! Rep the **** out of them for me !

 

[Acornhill]

Thanks Hydrodog !! And Pioneerguy600 !!

He posted the CL ad for this saw , I had to jump through a few hoops to get it , but I just got it today ! My buddy Jerry sent me a PM telling me to get over to the Pioneer thread QUICK ! LOL He knew I was after one of these saws ever since I seen a pic of his ! Bout 2 years ago !! LOL

Haven't cleaned it up yet,this is how it came. Should clean up real nice !

Needs just a couple small things, muffler bolt,I should have ? Fuel cap threads are messed up,choke rod is bent and the hard part I bet? The knob for the oil pump. Brake handle is a little bent , but I can fix that easy I think.



Thanks again guys !! Rep the **** out of them for me ! :

sweet saw, i am hooked also on the Pioneers!!

 

[tbone75]

Thanks Hydrodog !! And Pioneerguy600 !!

He posted the CL ad for this saw , I had to jump through a few hoops to get it , but I just got it today ! My buddy Jerry sent me a PM telling me to get over to the Pioneer thread QUICK ! LOL He knew I was after one of these saws ever since I seen a pic of his ! Bout 2 years ago !! LOL

Haven't cleaned it up yet,this is how it came. Should clean up real nice !

Needs just a couple small things, muffler bolt,I should have ? Fuel cap threads are messed up,choke rod is bent and the hard part I bet? The knob for the oil pump. Brake handle is a little bent , but I can fix that easy I think.



Thanks again guys !! Rep the **** out of them for me ! :

sweet saw, i am hooked also on the Pioneers!!

From the looks of that sig. your hooked on all of them ! LOL

I have no room to talk ! LOL

Like them Pioneers the best !! :msp_thumbsup:

 

[pioneerguy600]

Thanks Hydrodog !! And Pioneerguy600 !!

He posted the CL ad for this saw , I had to jump through a few hoops to get it , but I just got it today ! My buddy Jerry sent me a PM telling me to get over to the Pioneer thread QUICK ! LOL He knew I was after one of these saws ever since I seen a pic of his ! Bout 2 years ago !! LOL

Haven't cleaned it up yet,this is how it came. Should clean up real nice !

Needs just a couple small things, muffler bolt,I should have ? Fuel cap threads are messed up,choke rod is bent and the hard part I bet? The knob for the oil pump. Brake handle is a little bent , but I can fix that easy I think.



Thanks again guys !! Rep the **** out of them for me !

Very happy you got it since you wanted one so badly. We will find the parts that are missing to make it whole again.

 

[tbone75]

Very happy you got it since you wanted one so badly. We will find the parts that are missing to make it whole again.

I am very sure of that ! Got the best help I could find anywhere !

 

[tbone75]

Want to fire it up real bad !! But I know I have to wait a while. LOL Can't mess up the back stuff !

 

[pioneerguy600]

Want to fire it up real bad !! But I know I have to wait a while. LOL Can't mess up the back stuff !

That saw isn`t going anywhere....it will be there when you are healed/ready. Don`t rush it.

 

[tbone75]

That saw isn`t going anywhere....it will be there when you are healed/ready. Don`t rush it.

Waited 2 years to find one,I can wait a little longer to run it. LOL

 

[tbone75]

Bars I got with the P62 ,new 36", new 18' & good 34" & chain. Long bars are real Pioneer bars ! And 2 more saw pix.

 

[DSS]

Waited 2 years to find one,I can wait a little longer to run it. LOL

Thank god you got one, I don't have to hide mine under the bed anymore. I got a choke rod, a muffler bolt and a fuel cap. Send me your address.

And if you find a knob for the oiler, I need one too.

 

[tbone75]

Thank god you got one, I don't have to hide mine under the bed anymore. I got a choke rod, a muffler bolt and a fuel cap. Send me your address.

And if you find a knob for the oiler, I need one too.

I guess yours is safe again. :msp_w00t: Maybe I want 2 of them ? :msp_razz:

Thanks Chris ! PM on the way !

Bet that knob is a real beach to find ! :msp_unsure:

 

[Busmech]

I guess yours is safe again. :msp_w00t: Maybe I want 2 of them ? :msp_razz:

Thanks Chris ! PM on the way !

Bet that knob is a real beach to find ! :msp_unsure:

I gave up looking for those knobs a long time ago but I found that a short piece of vacumn hose works(about 3/8 inch long) push it down to just above flush. Doesn't look right but makes it a lot easier on your thumb.

 

[tbone75]

I gave up looking for those knobs a long time ago but I found that a short piece of vacumn hose works(about 3/8 inch long) push it down to just above flush. Doesn't look right but makes it a lot easier on your thumb.

That would be way easier on my thumb ! LOL

Thinking I may be able to make some kind of knob on a lathe ? Aluminum maybe ? Set screw to hold it on ? Big enough to go easy on the thumb too ! I have some thick hard nylon that may work ?

 

[Arrowhead]

Great looking P62 John!!
Did you get the PM I sent about the oiler button?

 

[tbone75]

Great looking P62 John!!
Did you get the PM I sent about the oiler button?

Yes I did ! Thanks Ed !!

 

[IEL]

My dad has an old pioneer 450 in mint condition. :drool: (it still has original chain, and original factory spare still in its bag) He said he would give it to me IF I can fix the fuel pump. When he got it at a car show and swap meet, the fuel pump gasket was mostly disolved. He tried to make a new one, and it kind of works if you tip the saw at the correct angle and hold your mouth right. If I can find the proper gasket, it will be mine. I am sure one of you can point me in the right direction.

 

[fossil]

My dad has an old pioneer 450 in mint condition. :drool: (it still has original chain, and original factory spare still in its bag) He said he would give it to me IF I can fix the fuel pump. When he got it at a car show and swap meet, the fuel pump gasket was mostly disolved. He tried to make a new one, and it kind of works if you tip the saw at the correct angle and hold your mouth right. If I can find the proper gasket, it will be mine. I am sure one of you can point me in the right direction.

PM sent