I think green and gold.........
Sure is quiet in here....do I need to start a fight?
- Thread starter caleath
- Start date
Help Support Arborist Forum:
I think green and gold.........
roncoinc
Official Stihl Disser
What you do when you wanna pull the dryer out for some reason ??
flex line,pull it out once a year,vacume behind dryer and vac out line,good to go.
i like the adapters that vent in the house,great in winter,no wasted heat.
aint like toxic fumes coming out of the dryer vent !! LOL !!1
silly people make a biggie out of nuttin !!
even betterer,,get an OUTSIDE clothsline !!
free dryer,smells good,,green,,uses solar power.
roncoinc
Official Stihl Disser
I got some laundy out on the line now.
about time i finish hanging it the first clothes ready to take down !!
FREE !! FREE !! FREE !!!
no lectic bill,,no gas bill !!!,, no runnin vents,,no room taken up by dryer !!
completelly solar powered
I got some laundy out on the line now.
about time i finish hanging it the first clothes ready to take down !!
FREE !! FREE !! FREE !!!
no lectic bill,,no gas bill !!!,, no runnin vents,,no room taken up by dryer !!
completelly solar powered
Ayup , best kinda dryer !
I just got mine fixed , been broken for the last 2 weeks .
Cute little torch you found Geoff !
roncoinc
Official Stihl Disser
The Beer Institute also released an updated ranking of which states purchase the most and the least beer. The top five beer buying looks like this:
1. North Dakota
2. New Hampshire
3. Montana
4. South Dakota
5. Wisconsin
" HOORAY BEER !! "
1. North Dakota
2. New Hampshire
3. Montana
4. South Dakota
5. Wisconsin
" HOORAY BEER !! "
All that help from Quebecers and Massachusetts has finally paid off , maybe #1 next year ...........
roncoinc
Official Stihl Disser
Bunch of slackerzzzzzzzzzzzzz !!!
borrowed a pole saw today,,planned on using it ,,untill it got to hot..
so,,,see,,,,,i DID plan on some saw stuff today
just came inside to get some stuff ready for the BBQ....
air on in here and COLD !!
i like WARM !
borrowed a pole saw today,,planned on using it ,,untill it got to hot..
so,,,see,,,,,i DID plan on some saw stuff today
just came inside to get some stuff ready for the BBQ....
air on in here and COLD !!
i like WARM !
They are for the most part all the same except for the pickups in the fuel tank and fuel lines.
little possum
Crash and Burn
Sun shining, but cloudy, drizzled a few times. Raining at the farm park, and dont feel like ridin over to stand in heat and rain. Dont wanna be out on the river.. Blah.
Found a broken shaft in the Kubota, 2 gears that need replacing, and 3 bearings. Time to pull out the IPL and get the part numbers.
Found a broken shaft in the Kubota, 2 gears that need replacing, and 3 bearings. Time to pull out the IPL and get the part numbers.
AU_K2500
NSM
Finished up the to-do list for today. Just in time to light the grill soon. On beer number 2.
View attachment 303144
View attachment 303144
Sparky went for a trip out there,and got lost!
Them must be Canadian beers.......LOL
Them must be Canadian beers.......LOL
Just got home from the birthday party.
Nephew showed up needing wood to roast a hog. Gave him Hickory and Cherry , should do it OK.
Nephew showed up needing wood to roast a hog. Gave him Hickory and Cherry , should do it OK.
Hmmm , the humidex sez 96 , muh shirt sez different .
Ron , I can lend you my lecticity Kita , starts at the pull of a trigger .......Now that you got your lecticity all paid up .
No need to break out in a sweat workin a pull cord before you start to do the real work LOL
Ron , I can lend you my lecticity Kita , starts at the pull of a trigger .......Now that you got your lecticity all paid up .
No need to break out in a sweat workin a pull cord before you start to do the real work LOL
I have a white one sitting on a shelf. LOL May be there a while yet ? To many other ahead of it. Real neat saw !
Im falling in love with that 1971 international fire truck. :msp_wub:
We had it going with the 1.5 inch line, and a brass cone shaped stream nozzle. First time he ran that nozzle.
He had the pressure at about 120 psi, and it took almost all my strength to hold onto it.
The truck goes up to 300 psi, and with only a few hundred hours on the rebuilt pump, it would have no trouble doing it.
He suspected the old slightly rotten hose we were using would have burst if he cranked it up.
If he just bumped the control a bit, and even raised it 25 psi, I would have gone flying. Two guys would have struggled to control it at full power.
He was telling me he once saw a 3 inch line take two guys airborn. Amaizing amount of power.
He said if I have the money when he sells it (within 10 years) I would be first in line. :msp_w00t:
I would make it my daily driver if I had to, I will own it.
It is still fully equiped, 5 full fire suits with breathing gear, close to 20 hoses. Everything is perfect on it. It was fully rebuilt 6 months before the insurrance forced the department to sell it, and is in better mechanical condition than most working trucks. Even has a ham radio.
We had it going with the 1.5 inch line, and a brass cone shaped stream nozzle. First time he ran that nozzle.
He had the pressure at about 120 psi, and it took almost all my strength to hold onto it.
The truck goes up to 300 psi, and with only a few hundred hours on the rebuilt pump, it would have no trouble doing it.
He suspected the old slightly rotten hose we were using would have burst if he cranked it up.
If he just bumped the control a bit, and even raised it 25 psi, I would have gone flying. Two guys would have struggled to control it at full power.
He was telling me he once saw a 3 inch line take two guys airborn. Amaizing amount of power.
He said if I have the money when he sells it (within 10 years) I would be first in line. :msp_w00t:
I would make it my daily driver if I had to, I will own it.
It is still fully equiped, 5 full fire suits with breathing gear, close to 20 hoses. Everything is perfect on it. It was fully rebuilt 6 months before the insurrance forced the department to sell it, and is in better mechanical condition than most working trucks. Even has a ham radio.
Slackers all over tonight ! :msp_razz:
BigDaddyR
Addicted to ArboristSite
Slakin today. Wife outlawed any work for me today. No working on saws, no splitting wood. Slept in and then took the DW for a motorcycle ride. Steaks for lunch and then napping. Theres always Monday, took it off for a sanity day. Lots of work will get done then.
Found a good use for the 4 cycle weed eater I got working last night. Oldest step son just bought a house and doesn't have one. This is a combi kit style so he could get other attachments for it as well.
Got the rewind spring supposed to be in tomorrow for the Echo so that will be my backup. No attachments but oh well.
Happy 4th. Hope everyone had a great day!!
Found a good use for the 4 cycle weed eater I got working last night. Oldest step son just bought a house and doesn't have one. This is a combi kit style so he could get other attachments for it as well.
Got the rewind spring supposed to be in tomorrow for the Echo so that will be my backup. No attachments but oh well.
Happy 4th. Hope everyone had a great day!!
