What was wrong with the whacker ?
Sure is quiet in here....do I need to start a fight?
- Thread starter caleath
- Start date
Help Support Arborist Forum:
What was wrong with the whacker ?
Jimmy in NC
Addicted to ArboristSite
Long day. Got the crown up and caulked. Finished up a 7900 Dollar for my buddy and that joker screams. Now to finish my 288 up and get it ported. Put him back in his place! Hot and humid but no rain today for the first time in a while. Still have standing water all over the yard though....
Jimmy
Jimmy
Need a BB kit on that Dolly ! 84cc ported ! Mine is wicked ! LOL
Smurfy has one too !
Last edited:
BigDaddyR
Addicted to ArboristSite
Fuel lines were rotted off at where they went into the fuel tank and carb was a bit clogged up. Cleaned it, replaced fuel lines and got it running last night. Now I get to give it away. LOL. Was in the garage getting the bike out for my ride and gave it a few pulls and started up pretty easy.
BigDaddyR
Addicted to ArboristSite
What did you do to the Dolmar? Repair or upgrade?
He just fondled it ! :msp_w00t:
Sorry John,.....I see you are trying to hold the fort down all by yourself and the rest are not much help......LOL
I have been trying to sand a canoe with one hand, talk on the phone and try to keep up with PM`s so I had little to no chance of posting on here.
I have been trying to sand a canoe with one hand, talk on the phone and try to keep up with PM`s so I had little to no chance of posting on here.
I did work on a whacker today. Before I went to the party. I don't like whackers very well. LOL Not sure why ? Nothing to them !
No problem ! I am use to it ! :hmm3grin2orange:
I don't have much to say when I haven't been buying saws or working on them ! Been a Super Slug for a while !
I have quite a few other irons in the fire myself so only got the Contra on the go right now, still finding parts for it though....LOL
I have a 17' fiberglass canoe to rebuild so many hours of sanding and glass repair required. It has a lot of keel wear and the strengthening ribs need a lot of reinforcement applied. Good summer project.
I plugged the foot pedal I got with this last grinder into my small drill press. Dang thing works ! Not real sure if it will hurt the motor in it ?
Going to try it my band saw , if it works I can put a metal blade on it ! LOL
opcorn:opcorn:BigDaddyR
Addicted to ArboristSite
Can't seem to find any saw deals in my area. Most are 3 hours away in more rural areas. Would like to find a good 50CC project like a 346 or 100-120CC modern work saw. Guess I ought to get the ones I have here out of here first. Making progress though. The Craftsman will be leaving this upcoming week once I get a chance to tune it. Then time for the top handle and two Macs.
- Joined
- Feb 17, 2009
- Messages
- 16,786
- Reaction score
- 16,230
- Location
- Beautiful Rockbound Coast of Maine
Had to go and watch the fireworks with the lovely lady.......down in Castine Harbor.....set off from a barge.....very good show....long.....lots of sparks and bangs....several Bar Harbor Real Ales at my friends taproom before and after......going down by the nose now ...headed for the hay.....all done.....hot & humid.....94 here today....Phew....
Mac ! YACK !!!
BigDaddyR
Addicted to ArboristSite
Necessary evil. Mac 10-10A goes back to a friend and the PM605 will be mine to keep.
10-10A may be done , have to put it back together and test it out
PM605 has no spark so have to check the stop switch and the coil. Once running I'll probably clean and sell it.
Sent on the fly.
Jimmy in NC
Addicted to ArboristSite
BB kit then the oiler line was missing. Did a muff mod and tuned it with the BB kit. Wicked saw that porting could only make better.
He picked it up with a straight gassed top end. BB kit on it, muff mod, and new B&C. She's a screamer now.
Don't tell everyone....you said it was just between us!
On that note....time for this slacker.
Jimmy
Nite Robin.
