Sure is quiet in here....do I need to start a fight?

[farrell]

Its truth, not hating. How you sposed to make any headway on a clearing job when all you do is work on yer saw.Heard those words many ,many times from the crew boss over the years. I have to have sawsw that get a job done without breaking down every time its put to work.

Back on this subject again...........

Rarely do I have problems!

**** happens!!

Operator neglect

Bad gas

Who knows?

But everyone instantly blames the equipment

I know a ton of people who own husky/jred and never have a lick of trouble and abuse the **** outta there saws and they keep right on tickin!

To each their own

 

[Stihl 041S]

Well we'll have to set up a play date then.:msp_biggrin: Have to let me know when you want to go cutting.

After I move, and drive 5000 miles. Lol

Won't be long.

 

[BigDaddyR]

After I move, and drive 5000 miles. Lol

Won't be long.

Thought you were just right up the road. What did I miss. LOL

 

[Stihl 041S]

Use caution Rick!

They is husky haters in stihl clothing!

Who's hating?? I have a Hooskie!!!!



I'm pretty sure.

 

[BigDaddyR]

Back on this subject again...........

Rarely do I have problems!

**** happens!!

Operator neglect

Bad gas

Who knows?

But everyone instantly blames the equipment

I know a ton of people who own husky/jred and never have a lick of trouble and abuse the **** outta there saws and they keep right on tickin!

To each their own

This is the fight thread. LOL. Never had problem with my Huskey I didn't cause. LOL

 

[Stihl 041S]

Thought you were just right up the road. What did I miss. LOL

Before I have fun I got to visit before snow.

I work nights.

I'm trying!!!

 

[pioneerguy600]

I loved Kellog and Butler forged steel cranks, also the ones Joe Mondellow turned out.

 

[pioneerguy600]

Back on this subject again...........

Rarely do I have problems!

**** happens!!

Operator neglect

Bad gas

Who knows?

But everyone instantly blames the equipment

I know a ton of people who own husky/jred and never have a lick of trouble and abuse the **** outta there saws and they keep right on tickin!

To each their own

LOL....

 

[Stihl 041S]

This is the fight thread. LOL. Never had problem with my Huskey I didn't cause. LOL

And Adam was listing Operator Error!!!!!

I got tons of faith in him!!!!

Must have been the equipment ..........

What brand saw were you running????

 

[tbone75]

I loved Kellog and Butler forged steel cranks, also the ones Joe Mondellow turned out.

I only had stock stuff. LOL The best I could I find ! LOL Maybe an intake and carb was bout it.

 

[farrell]

And Adam was listing Operator Error!!!!!

I got tons of faith in him!!!!

Must have been the equipment ..........

What brand saw were you running????

Keep it up smartazz!

The blown case gasket in my 372 (1st saw I ever rebuilt).........maybe I didn't get the case bolts torque right?

The 346 may have gotten bad gas or a piece of **** in the carb?

 

[roncoinc]

It`s a Hooskie!!!!! What you expect??

Go lay down Dan..

 

[BigDaddyR]

Before I have fun I got to visit before snow.

I work nights.

I'm trying!!!

Sounds good. Maybe I'll have the 064 up and going by then. Bring the 365 and get some sawdust on it so Scoot won't poke so much fun at me. LOL. Just blew the dust off it from my visit with him tonight. LOL

 

[Stihl 041S]

I loved Kellog and Butler forged steel cranks, also the ones Joe Mondellow turned out.

Tom Franks would do billet.

Forged (untwisted) vs forged vs billet were beyond my power levels.

 

[pioneerguy600]

Tom Franks would do billet.

Forged (untwisted) vs forged vs billet were beyond my power levels.

Forged just a little better for high RPM`s, they flex a little more than the more brittle CI ones. They could destroke the crank some and use longer rods to help with those high RPM`s also. Not cheap but great when the build was expecting a couple thousand revs above stock.

 

[pioneerguy600]

Tom Franks would do billet.

Forged (untwisted) vs forged vs billet were beyond my power levels.

That name rings a bell,..did he work for Precision over in Boise?

 

[IEL]

Back from another day.

Turns out the boss cleared the scrap saw pile out a little while ago, as in a few werks ago..... ARRGH

Only 1 026, and 2 other stihls left......

Might be able to get a ms200t parts saw eventually?
After the useful (to them) parts are gone.. Clutch cover, recoil, air filter cover, caps, ect.

Nice little saws!


My shop is almost back in service (junk removed) so I can get back to saw work.
I have two stihls, a mac, and a canadien in line.....

 

[Stihl 041S]

Keep it up smartazz!

The blown case gasket in my 372 (1st saw I ever rebuilt).........maybe I didn't get the case bolts torque right?

The 346 may have gotten bad gas or a piece of **** in the carb?

Ya got a choise.........

Smartazz or Dumbazz.........I prefer the former.

Hey Adam!!!!

And I for JReds!!!!!


Well.... One anyway. Lol

 

[Stihl 041S]

That name rings a bell,..did he work for Precision over in Boise?

He headed up to Idaho after being in Southern California.

TRD would drop off 20 engines at a time for him.

He was one of the Bearded Weirdos.

Great bunch of folks.

 

[BigDaddyR]

Walking dead back on!