Sure is quiet in here....do I need to start a fight?

[pioneerguy600]

My stove aint no Husquee, don`t need constant attention, just a refill every 4 hrs or so....LOL

Dont you have a wood stove to feed ? ,, or sumthin ??

 

[Jimmy in NC]

Anyone know if I can put something other than a 021 top end on an 021? 023 maybe?

 

[tbone75]

Anyone know if I can put something other than a 021 top end on an 021? 023 maybe?

Yep , all them and a 025 will work, I think ? LOL

 

[tbone75]

027 works too I think ?

 

[tbone75]

Anyone know if I can put something other than a 021 top end on an 021? 023 maybe?

WTF are you doing with one of them ? LOL

 

[tbone75]

I have one or each of the 021 & 025s here. Been a while since I worked on any of them. Jerry should know fer sure. Thins are different on the MS stuff.

 

[Jimmy in NC]

I've got two of them to fix. I think both are toasted... so I figured if building... build better.

 

[Jimmy in NC]

I've got an 021 and an MS210. If I can cram 025/250 jugs and slugs on them.. hey now.. that's a fun little POS that is a hoot with a 16" 3/8 LP setup if I've ever run one!

 

[tbone75]

I've got an 021 and an MS210. If I can cram 025/250 jugs and slugs on them.. hey now.. that's a fun little POS that is a hoot with a 16" 3/8 LP setup if I've ever run one!

I got some stuff here for them , see what all ya need. Even got a new 025 top end for one from china. LOL Good nuff for them saws ! LOL

 

[Jimmy in NC]

Nope... different strokes. Dang it! 28mm stroke vs the 32mm stroke.

 

[Jimmy in NC]

Gotta open them up to see. Maybe tonight if it stays cold. I can go open them up and take an inventory on how bad they are. Maybe they aren't both melted down but pulling them didn't feel good.

 

[pioneerguy600]

Anyone know if I can put something other than a 021 top end on an 021? 023 maybe?

The 023 or 025 will fit the 270 is a different saw.

 

[tbone75]

Dang it !!! Just membered something else I wanted to send to the Great White North ! Gotta open that box again ! yes again , second time now !

 

[Jimmy in NC]

The 023 or 025 will fit the 270 is a different saw.

How will it do with the shorter throw crank?

 

[farrell]

It was 0 when I woke up this mornin 5 out now

Made it back from town

Jumped the tractor and relocated snow for an hour and a half

Pizza for lunch

 

[Jimmy in NC]

If these will clean up, I'll just throw some pistons in them and maybe try to port one.. if I screw it up I haven't lost much... ok nothing really.

 

[tbone75]

The 023 or 025 will fit the 270 is a different saw.

OK , knew something was different with them !

 

[pioneerguy600]

Anyone know if I can put something other than a 021 top end on an 021? 023 maybe?

Just to clear this up, they are clamshell saws so they don`t have top ends per say, you change out he whole block so a whole shortblock is need as an engine swap.

 

[Stihl 041S]

Got a Rob box !!

depends ??????????

Didn't I send any??????

 

[Jimmy in NC]

Looks like for a little money I can build an 025 in 021 wrapper.. try my hand at grinding.. we can be cookin' with peanut oil.