the all aussie dribble thread!

[Gypo Logger]

Sleigh ride in July. Im back in the woods.

 

[Gypo Logger]

 

[derwoodii]

well it worked much as expected but i had it tethered as not bother RO if was to wander into other shooter lanes

 

[derwoodii]

fuggen cold this morning 19/07:00am -2.3 so i slept in now its too cold n the shed to be bothered with chores & my fire wood piles looking a bit light on if this cool run keeps up i'm gonna have to scrounge out some dead dry stuff to make it to September but finally some snow down to aim for later August


still dont complain its not - 45 C http://www.bom.gov.au/products/IDT60803/IDT60803.89767.shtml

http://www.antarctica.gov.au/living...s/page?id=164905&st=Davis&dt=MjAxNS0wNy0xNw==

 

[peter92]

Hi guys, great to have the lap top back after it crashed
im chasing a 14'' D176 bars for my echo if any one has them lying around please
trying to find a 14'' bar and chain to go on my cs 452 vl echo, if some one knows where to get one

 

[Jimbo209]

whats a good cheap fire pit saw for a teammate he mentioned the ryobi at mazzegas mitre10 that is closing down @ 50cc but to much$, thinking a 024/026 whats reliable and cheap used to handle

also

http://www.ebay.com.au/itm/Jonsered-2095-turbo-chainsaw-/252028776879

Hi guys, great to have the lap top back after it crashed
im chasing a 14'' D176 bars for my echo if any one has them lying around please
trying to find a 14'' bar and chain to go on my cs 452 vl echo, if some one knows where to get one

Ask Matt mcw

 

[peter92]

whats a good cheap fire pit saw for a teammate he mentioned the ryobi at mazzegas mitre10 that is closing down @ 50cc but to much$, thinking a 024/026 whats reliable and cheap used to handle

also

http://www.ebay.com.au/itm/Jonsered-2095-turbo-chainsaw-/252028776879

Ask Matt mcw

yeah, good idea, so what do you recon Matt

 

[Jimbo209]

yeah, good idea, so what do you recon Matt

local site sponsor. will have/know who will have
and hes a great bloke to top it off

 

[Jimbo209]

brand new 346xpg x 2 anyone I'll pickup and post for you
with the big safety brake handle

http://www.gumtree.com.au/s-ad/osbo...-15-50-1cc-chainsaw-made-in-sweden/1059827089

 

[fmunoz162]

Looking for mar bar climbing system


Sent from my SPH-L720 using Tapatalk

 

[2strokenut]

well it worked much as expected but i had it tethered as not bother RO if was to wander into other shooter lanes

View attachment 436456

iv never seen one like that befor is it supose to flip ? like the one below

 

[peter92]

local site sponsor. will have/know who will have
and hes a great bloke to top it off

just sent Matt ,MCW, an email
had a look last night but only seen 16'', im running 18'' now but 14'' would be better

 

[peter92]

whats a good cheap fire pit saw for a teammate he mentioned the ryobi at mazzegas mitre10 that is closing down @ 50cc but to much$, thinking a 024/026 whats reliable and cheap used to handle

the 024 are a great all round saw

 

[460cixy]

iv never seen one like that befor is it supose to flip ? like the one below
View attachment 436750

That looks ok I might knock one up. I made a swinger for the missus with a basic frame and hung a couple of motor bike brake rotors Off it works ok

 

[MCW]

iv never seen one like that befor is it supose to flip ? like the one below
View attachment 436750

Me, my mate, and his lad probably fired 500 rounds at one of those things yesterday. Good fun until they go sideways and you can't turn them straight again. Not allowed to fire high velocity at them either as they bend.

 

[2strokenut]

the one i have is about 8mm thick only shot it a few times now

 

[postrip]

Had a few hrs spare this morning, so I attacked the 090 bottom end....

 

[derwoodii]

iv never seen one like that befor is it supose to flip ? like the one below
View attachment 436750

yup flip roll tumble but its not as good as i hoped considering the price tag the round model one likely better reaction but i feared it would wander to much

 

[Lisnm8]

Any builders, drafties or someone that can help in the design of my garage. My boundary Line is on an angle as per pic, I want to do a pitched roof and a rear hip to accommodate the angle of my boundary. I understand the hip will look a bit stupid but it's facing a lane way so not fussed. It will be a bit skewed but My draftsman wants to just do the back section flat roofed. And said if hipped the rear gutter will be on to much of a fall. I don't get it? Why can't it work?

I understand the trusses will be a nightmare but I don't want a flat roof, being 6"4 I need all the head room I can get. And I can't simply move the hole garage forward....I even banged up a quick scale model lol and my thick head can't see why it won't work

 

[derwoodii]

one off design will cost you $$ as they have to work out the fit structure dynamic & roof iron work cuts..Idea maybe,,,, get them to design build the basic square roof and truss at front then you fill in the rear remainder in your own time cost and effort be a bit of jig saw but may get what you want