the all aussie dribble thread!

[Stihlman441]

When i put them on there i was thinking mmm,but no probs at all only had about 15 km to home,when i got home couldnt roll them off but had to get a mate around to help me.There is three more there but they are not as big.
This is a pine log i managed to get home that i made a bench seat out of using a mini mill and 460.

 

[Rudolf73]

When i put them on there i was thinking mmm,but no probs at all only had about 15 km to home,when i got home couldnt roll them off but had to get a mate around to help me.There is three more there but they are not as big.
This is a pine log i managed to get home that i made a bench seat out of using a mini mill and 460.

That is real cool Andrew :msp_thumbup:

What chain were you running on the 460?

 

[Stihlman441]

The chain was a Carlton semi chisel ripping chain with 10 deg angle.

 

[MCW]

Good stuff Andrew. Those Falcons can handle a load for sure. What pressure are in your tyres? 50psi?

Only kidding. I'd bet my left nut that if I hung logs like that over the back in my area I'd be pulled over in 2 seconds flat. Dammit...

We even had a local truckie get done for an unsecured load when some mud fell of his mudflaps as a highway patrol car was following him...

We've had a heap of reports come through about overloading work utes where a few trays have parted company with the chassis after the HT bolts have let go. Nasty stuff...

 

[Stihlman441]

You were close with the tyre pressure i put 58 psi in um,when i go this tray made mate it was made to carry firewood and she is made XXX strong,extra ribs,thicker steel.extra bolt down points ect.

 

[MCW]

You were close with the tyre pressure i put 58 psi in um,when i go this tray made mate it was made to carry firewood and she is made XXX strong,extra ribs,thicker steel.extra bolt down points ect.

Plus a 2 tonne counterweight under the bonnet?

 

[deye223]

Plus a 2 tonne counterweight under the bonnet?

nar thats behind the wheel oops sorry andrew

 

[Stihlman441]

Thats it no more bars for you.:hmm3grin2orange:

 

[MCW]

nar thats behind the wheel oops sorry andrew

Well forward of the rear axle so should do the job

 

[deye223]

Thtats it no more bars for you.:hmm3grin2orange:

told ya i only wanted one for photos don't sapose you've got a 18" ya don't need the 24" is to big for the 260 because i'm in australia mate:msp_biggrin::msp_biggrin::msp_biggrin:

 

[ausneil 1]

When i put them on there i was thinking mmm,but no probs at all only had about 15 km to home,when i got home couldnt roll them off but had to get a mate around to help me.There is three more there but they are not as big.
This is a pine log i managed to get home that i made a bench seat out of using a mini mill and 460.





Thats a great little set up to cut out the angle like that instead of square. I have a westford which only runs on a guide across the top.

 

[Stihlman441]

told ya i only wanted one for photos don't sapose you've got a 18" ya don't need the 24" is to big for the 260 because i'm in australia mate:msp_biggrin::msp_biggrin::msp_biggrin:

I have got a new never used 18'' but its 3/8 .063 do ya use 3/8 or .325 on the 260.

 

[AUSSIE1]

Yeah that's a fair load Andrew, especially with the overhang! Where's the red rag?

 

[Rudolf73]

I think Andrew needs a set of these on the back of his ford

 

[Stihlman441]

Close i just got a 10' x 5' tandem trailer yesterday so look out.

 

[Rudolf73]

Close i just got a 10' x 5' tandem trailer yesterday so look out.

Nice, put a crane on it :msp_wink:

 

[David (saltas)]

That trailer better get some new axles so you can mount forklift tyres on it

 

[Stihlman441]

Whats going on ,nothing on tv tonight guys so we will go pick on Andrew.

 

[MCW]

Thats our job

 

[AUSSIE1]

Well, the Browns are getting too close for comfort so I whopped one yesterday. Walked around the back of the ute and here he is rearing up at me the little bugger. Got one in behind the pump shed. Biggest one I've seen around here. Then spraying along the fence line there was the darkest one I've seen here also as they are usually a creamy colour.