Stihl have no idea what I will do today ? LOL Better work on the camper ! My buddy brought me some plywood yesterday evening for shelving.
Sure is quiet in here....do I need to start a fight?
- Thread starter caleath
- Start date
Help Support Arborist Forum:
No class today, it will be a good morning. Making a pot of coffee, watching the red green show, than working on a big Mcculloch. I saw that home hardware has a generic pizz off for $2 ($4 less than brand name) Let's hope my store stocks it.
The dollar store stuff don't work as good. Works fine if its not real bad. I keep both around now. LOL
doing good today.
got TWO saws fixed.
recoil on a mine and throtlle lock on another .
I haven't got off my flippy cap yet. LOL
Mornin fellas!
Went and fetched gas this mornin
Finished mowing and did the trimming
Prolly gonna take a couple mowings to get the yard back to normal
But least it don't look like a hay field no more
Went and fetched gas this mornin
Finished mowing and did the trimming
Prolly gonna take a couple mowings to get the yard back to normal
But least it don't look like a hay field no more
I got 2 days off from mowing ! Now it starts again ! LOL Just can't let it go back to what it was,looks way to nice. Don't see any good way to let part of it go ? That and all the work it was clearing it off in the first place ! I use to mow down the back yard a lot more,but let that go back.Just to hard mowing around all them trees ! I had even dug up over 100 little stumps down in there ! Was stihl hitting more with the mower ! LOL
Once I get a bigger better sprayer, I will fix that chit ! LOL No mowing !!
I gotta get a push mower to do around the spruce in the front yard!
All the roots that stick up are hard on my tractor deck!!
roncoinc
Official Stihl Disser
After the two saws i started in deck building,,then got interupted,,small tiller needed all new fuel lines.
got that done and now break time
- Joined
- Feb 17, 2009
- Messages
- 16,769
- Reaction score
- 16,146
- Location
- Beautiful Rockbound Coast of Maine
Not really an option Geoff........bolts went through 3" long by 1 1/4" dia aluminum bushings mounted in 3" long by 3" dia rubber mounts keyed inside holes in the aluminum bellhousing then the bolts went through another 3" of aluminum in the transom plate which could not be damaged.......all this inside a plastic boat with a half full 55 gal gasoline tank 36" away.....and inside my cabinet shop that houses around $200,000 worth of tools not even counting the 3,500 sqsf building.....smoke wrench not applicable in this case.....or believe me the Purox would have been there!!!...LOL!!
After the two saws i started in deck building,,then got interupted,,small tiller needed all new fuel lines.
got that done and now break time
I cleaned up stuff from the GTG. LOL Time for lunch,then I may do something ? Need to find some motivation ? Seems real hard to come by around here. LOL
Really want to go get them trees out f my way ! Just not ready yet. Maybe after I see the doc again ?
Look what I picked yesterday !! 
Look what I picked yesterday !!
Oh my maters!!!!!!
BigDaddyR
Addicted to ArboristSite
Well I bit the bullet and bought some tools to make life easier and "try" to fix some saws. LOL
Got a compression tester for $30 and a Mityvac 8500 for about $10 more than I could order online for from a local parts store that does business with my body shop. They'll deliver it to me tomorrow and I won't have to wait almost two weeks. Then for a cheap spark tester and I'm done for a while until I clean a few things out.
Be excited to see how much my 365 is blowing.
Sent on the fly.
Got a compression tester for $30 and a Mityvac 8500 for about $10 more than I could order online for from a local parts store that does business with my body shop. They'll deliver it to me tomorrow and I won't have to wait almost two weeks. Then for a cheap spark tester and I'm done for a while until I clean a few things out.
Be excited to see how much my 365 is blowing.
Sent on the fly.
Quick question for anyone who has tried it. Can oven cleaner damage the die cast magnesium from old macs and pioneers? I hear it really messes up aluminum? Also, can it remove paint? (that would be a good thing in this case, I am borrowing a bead blast cabinet to strip it down)
