Sure is quiet in here....do I need to start a fight?

[pioneerguy600]

You wanted to play guessing games

We needed hints

So I did some looking

Check out post number 114567 above.

 

[tbone75]

From my notes it says the original coil for the metal flywheel was 000 400- 1300 and the replacement for that coil is 1122 400 1311.

JJ had put up a complete swap out list for these coils because there were several metal flywheels used on the 064 and 066 saws. There are some with two keyways while others had one.

From my notes the 1300 coil is considered the universal coil but it won`t work right with the poly flywheel, that flywheel takes the 1122 400 1314 coil.

I was looking too ! LOL The 0000-400-1300 is used on everything from a 024 to a 066 it seems ? I should have plenty of them !

 

[farrell]

Interesting to say the least!

So what is it exactly?

Ain't never seen one like that!

 

[tbone75]

Seen pix of saws something like that. Slower than slow ! LOL Sure wild looking ! Know what year it was made ?

 

[Stihl 041S]

Hey all!!

Any body been on over there in the last day?

Nice saw Jerry!!!!!

Cutting Holiday Fruitcakes??

 

[tbone75]

Can't get on , got over loaded ! LOL

 

[pioneerguy600]

Interesting to say the least!

So what is it exactly?

Ain't never seen one like that!

They were made in Montreal by Precision Equipment INC around 1946. Due to its scarcity there is little info on them, the exact year and even the model is somewhat in a grey area. Most likely a M3 made between 1945-1947.

 

[Stihl 041S]

Can't get on , got over loaded ! LOL

That's what I get.
Dedicated server soon.
Last I saw was a lot of "I'm here now. This place is great. Everywhere else sux."
NO content and a total waste of bandwidth.

 

[pioneerguy600]

Hey all!!

Any body been on over there in the last day?

Nice saw Jerry!!!!!

Cutting Holiday Fruitcakes??

Its been off line all day.

 

[Stihl 041S]

They were made in Montreal by Precision Equipment INC around 1946. Due to its scarcity there is little info on them, the exact year and even the model is somewhat in a grey area. Most likely a M3 made between 1945-1947.

Kripe. My 48 Disston is MiLES ahead of that.
But that looks lighter. Lol

 

[pioneerguy600]

Seen pix of saws something like that. Slower than slow ! LOL Sure wild looking ! Know what year it was made ?

Somewhere between 1945 - 1947 as far as I can find out. Old gent it came from said he got it right after the end of WWII.

 

[tbone75]

Who wants to come down here and start these 066s for me ? LOL I am a dang WIMP !

 

[pioneerguy600]

Kripe. My 48 Disston is MiLES ahead of that.
But that looks lighter. Lol

That is likely why they were not made for very long. The other model the same company made was a saw with a conventional bar, think it was called a M17. Must check that out.

 

[farrell]

Who wants to come down here and start these 066s for me ? LOL I am a dang WIMP !

I will!

Only if you was a lil closer......

 

[Stihl 041S]

Who wants to come down here and start these 066s for me ? LOL I am a dang WIMP !

Tie the handle to the deck and jump over the edge with it!!

Hey. What was it Ron did today?

Did I miss that??

 

[tbone75]

Ron left us hanging ?

 

[Stihl 041S]

Ron left us hanging ?

He must be real proud of it then. Lol

 

[tbone75]

Hes acting like Jerry , just tease us ! LOL

 

[Stihl 041S]

Hes acting like Jerry , just tease us ! LOL

And MEEEEN!!!!!

 

[Icehouse]

Who wants to come down here and start these 066s for me ? LOL I am a dang WIMP !

I'll be right there, gotta change my shoes.