Which Klotz?

[Mastermind]

The h1r is the cleanest oil I've used to date. I tried some of the motul 710 and it was real clean also.

I just tried a quart of R-50......

I'm going back to H1R.

 

[blsnelling]

So far so good on the H1R. I've not used any of the Motul 800 2T.

 

[mdavlee]

I've got about a half a quart of original techniplate here too. I've used it for lubing up bolts and stuff now. I won't use it in a saw again. If it was a saw just racing I might run it where build up isn't going to happen that fast. I had buildup in the other 372 in about 2 gallons of klotz.

 

[Fish]

I use R50 Lite..... More flavor, less calories.

 

[Stumpys Customs]

I've got about a half a quart of original techniplate here too. I've used it for lubing up bolts and stuff now. I won't use it in a saw again. If it was a saw just racing I might run it where build up isn't going to happen that fast. I had buildup in the other 372 in about 2 gallons of klotz.

I've seen enough after one tank that I won't be using it any more. What kind of smell does the H1R have??

 

[Mastermind]

I've seen enough after one tank that I won't be using it any more. What kind of smell does the H1R have??

None......thank goodness.

 

[mdavlee]

Yeah belray doesn't have hardly any smell. I like the klotz smell but not the deposits.

 

[blsnelling]

Yeah belray doesn't have hardly any smell. I like the klotz smell but not the deposits.

I love that smell too. Anyone tried the Motul 800 2T yet? I've got some, but am using up the H1-R first.

 

[Mastermind]

I love that smell too. Anyone tried the Motul 800 2T yet? I've got some, but am using up the H1-R first.

I liked it......for a while. Then it started giving me headaches. :msp_confused:

 

[Stumpys Customs]

I love the Klotz smell also, but it can get to you after awhile. :msp_razz:

 

[Fish]

I liked it......for a while. Then it started giving me headaches. :msp_confused:

That is called "marriage".......

 

[mdavlee]

I love that smell too. Anyone tried the Motul 800 2T yet? I've got some, but am using up the H1-R first.

The 710 motul didn't have much smell either. It's sort of like the bel ray. I mixed up 5 gallons of it and used it up and it didn't leave any noticeable deposits.

 

[rms61moparman]

I love the smell of Klotz R-50 but the Super-Techniplate will give me a headache if I'm confined with it.
I learned this on a hot still day bucking a HUGE silver maple and kneeling/bending over with that exhaust coming up right in my face and no wind to move it along didn't last long.
I came out of there quick!!!
Anyone ever work in a dynamite magazine????


Mike

 

[komatsuvarna]

Im still running and liking the H1R too. I've been running the K2 in the demo saws at work because it doesn't seem to effect the high side tune as much as the H1R, I like it as well.

 

[komatsuvarna]

I love the smell of Klotz R-50 but the Super-Techniplate will give me a headache if I'm confined with it.
I learned this on a hot still day bucking a HUGE silver maple and kneeling/bending over with that exhaust coming up right in my face and no wind to move it along didn't last long.
I came out of there quick!!!
Anyone ever work in a dynamite magazine????


Mike

Yep....talking bout a hell of a headache....handling the stuff without gloves gives me a headache. We got 2 magazines behind the shop .

 

[Andyshine77]

Besides the smell of R50 getting to me, the deposits on the piston crown were pretty bad. K2 seems to run quite clean and it has little smell.

 

[morgaj1]

I love that smell too. Anyone tried the Motul 800 2T yet? I've got some, but am using up the H1-R first.

Bringing up an old thread. I have been running Motul 800T for a good while now and really like it. I don't notice the smell that others have. I have an old stihl edger that I recently replaced the rings on. It had a large amount of carbon build-up on it. I pulled the exhaust the other day and almost all the carbon is gone. Good stuff in my book. I would like to run the H1R too.

 

[Fish]

Bringing up an old thread. I have been running Motul 800T for a good while now and really like it. I don't notice the smell that others have. I have an old stihl edger that I recently replaced the rings on. It had a large amount of carbon build-up on it. I pulled the exhaust the other day and almost all the carbon is gone. Good stuff in my book. I would like to run the H1R too.

So this stuff removed the built up carbon??? How?

 

[Andyshine77]

So this stuff removed the built up carbon??? How?

The detergents in the add pack, I've see this happen more than once.

 

[Fish]

A redneck with a cup of cold water in the carb breaks up carbon too......

So these detergents are the miracle workers then? So they soak into the existing carbon, and break it up?