Sure is quiet in here....do I need to start a fight?

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
I wonder if Jerry could build me one of those monster 064s?

I sort of fell in love with the 064 as soon as I saw one at the tree service.....

Amaizingly small and light for its power?

Might be a good use for a few pay checks?

I have an 064 project as soon as I get a few others out of the way. Gotta get mah parts ordered for the other things and proper testing. Good to hear the good reviews on the 064. If there's going to be a cream sickle in the stable it better be able to pull it's weight or the Huskies will laugh at it and make fun of it.
 
Okay. Site down again. I was logged on with IE and up came the Bucks. Grrr.

Time to go out to the shop, top off the trans fluid on the truck and try to figure out why the carb on the Homelite won't pop it over. Take out the welsh plugs and replace I guess.


Rick
 
Okay. Site down again. I was logged on with IE and up came the Bucks. Grrr.

Time to go out to the shop, top off the trans fluid on the truck and try to figure out why the carb on the Homelite won't pop it over. Take out the welsh plugs and replace I guess.


Rick

Have you soaked it? Was it noticeably filthy inside when you opened it up? Have you made sure you didn't tear the fuel line installing it?

I know lots of questions...but I pull the plugs as a last ditch effort.

Sent from my MiniMac on E-10.
 
Suppose I will see if the local husky dealer has a carb kit for the 346

And go from there
 
Have you soaked it? Was it noticeably filthy inside when you opened it up? Have you made sure you didn't tear the fuel line installing it?

I know lots of questions...but I pull the plugs as a last ditch effort.

Sent from my MiniMac on E-10.

No didn't soak it. Guess I can make a solution of purple power. Guess I can pressure test the fuel like to make sure I didn't puncture it installing it. When I pulled the fuel line off it to take the carb back off no fuel came out and not much in the carb itself. Not sure the height of the needle jet spring arm needs to be. Just matched the one that was there.


Rick
 
Yup ,I showed it the hammer and it started to cooperate..

Sent from my GT-S5660M using Tapatalk 2

Dan you can't abuse the smartazz phone!

You'll be sorry when it gets it's revenge!!!


Sent via ported iPhone4
 

Latest posts

Back
Top