What's On Your Bench 7-24-14 ??????

[Mastermind]

Just finished the 4th 064 of a batch I was doing.........now on a couple of 044s.

I should be caught completely up at the end of this week for the first time in several years.

 

[rburg]

Sounds like it is time to take a vacation.

 

[gregsl]

MS 260 and a husky 345fx brushcutter.

Currently re-assembling the saw and dis-assembling the brushcutter.

 

[cgraham1]

Just finished the 4th 064 of a batch I was doing.........

Did you use that piston and jug I sent?

Glad to hear your caught up. Your new scheduling system must be working.

 

[fearofpavement]

While the 026 was passing the pressure/vac tests I started disassembling a scored Stihl 039. I'm building it for Sawtroll as secretly it's his favorite type of saw and he has 6 or 8 of them. Mostly they're 029's though so this will be his first 039.

 

[rattler362]

Love those shotguns, actions slick as glass. Mine wears a 32" Full...It always brings meat home from turkey shoots.

Sent from my C811 4G using Tapatalk

Yes Sir you are right one of the smoothest old guns I have ever handled.

 

[jughead500]

While the 026 was passing the pressure/vac tests I started disassembling a scored Stihl 039. I'm building it for Sawtroll as secretly it's his favorite type of saw and he has 6 or 8 of them. Mostly they're 029's though so this will be his first 039.

Im saving up to send him an echo cs600.

 

[Mastermind]

Did you use that piston and jug I sent?

Glad to hear your caught up. Your new scheduling system must be working.

My first scheduled saw arrives on the bench August 11th. I'm wanting to have everything else outta here before that happens.

The jug is the one you sent. The piston is one the customer sent. I'm saving the piston you sent for my NOS 064.

Your 044 jug ain't gonna cut it.........no worries though. I have a extra, and am porting it for you.

 

[Grey]

I just finished up my overhaul of my 200T and 201T saws. Unfortunately, I couldn't get the 200T finished myself, cost me $20 in labor to get the carb. cleaned and tuned. I'm O.K. with that for my first saw. 201T is running great!

 

[JC360]

My new to me 044.Its on the bench, but only so I can look at and enjoy it!!!
It took a year, and either looking over thrashed old junk or not being able to get to the deals before someone else. But I think it was worth waiting for.

 

[cgraham1]

My first scheduled saw arrives on the bench August 11th. I'm wanting to have everything else outta here before that happens.

The jug is the one you sent. The piston is one the customer sent. I'm saving the piston you sent for my NOS 064.

Your 044 jug ain't gonna cut it.........no worries though. I have a extra, and am porting it for you.

Can't wait to see your NOS 064!

That's very generous of you to fix me up with an 044 cylinder! I have something for you, too. It will be headed your way soon. Thank you.

 

[Mastermind]

This top end you sent is enough.

I appreciate it you know.

 

[bryanr2]

Can't wait to see your NOS 064!

That's very generous of you to fix me up with an 044 cylinder! I have something for you, too. It will be headed your way soon. Thank you.

Me too! opcorn: and finally...... Knowing me..... Get the picture, Clint?

 

[Mastermind]

You fellers are too cool.

 

[cgraham1]

This top end you sent is enough.

I appreciate it you know.

I was going to send a pie, but I guess I won't now.

What I'm sending is big and yellow, and will look good on your bench.

 

[Mastermind]

I see.

 

[jughead500]

Today I'm tearing down a 036 for a total rebuild.damn near a new saw but it melted down.looks as though the pto side seal sprung a leak.I'm thinking that was caused from stihls shielded bearing idea at the time.

 

[frogdaddy]

I was going to send a pie, but I guess I won't now.

What I'm sending is big and yellow, and will look good on your bench.

Didn't know you could buy Mastermind with a pie. Good to know!

 

[kc4sfe]

Got a partially finished Stihl 075 waiting on a carb rebuild and muffler install before buttoning her up and seeing if it works, my 026 just stopped running after sitting for a month so I have to figure out what happened there, have an 044 in a box under the bench that will be started on soon - doesn't need much more than some cleaning, and a pesky Mini-Mac that has been under my bench for almost a year with fuel delivery issues.

All will have to wait until the Mrs. and I are done with our kitchen cabinets and breakfast bar though - gotta eat!

 

[cgraham1]

All will have to wait until the Mrs. and I are done with our kitchen cabinets and breakfast bar though - gotta eat!

Cabinets are fun, huh? Here's some we just got done with. For a customer...